# 3D Printers #3dp See also [[Prusa Hardware Upgrades]]. ## Prusa Mk3.9 (Upgraded an Original Mk3S+ to a Mk4 in July 2024, but they call this a "Mk3.9") - [ ] #project #3d-printer I have a nice nozzle, to install it I need an [adapter](https://www.prusa3d.com/product/nextruder-v6-nozzle-adapter/) ## Prusa Enclosure - [ ] #project #3d-printer #3dp #home-assistant #OctoPrint Would love to be able to control the lights, ventilation, dehumidifier, etc remotely: https://www.instructables.com/Smart-Relay-Control-Box-Automate-Your-3D-Printer-E/ - [ ] #project #3d-printer #3dp I'd like to install the LCD on the outside of the enclosure, but I need a longer cable first. I'd also like a [quick-release cable](https://www.printables.com/model/806502-xlcd-improved-quickrelease-for-original-enclosure) so it isn't such a task to remove the printer. - [ ] #project #3d-printer Install a [Quick-release PSU cable](https://www.prusa3d.com/product/psu-cable-quick-release-for-original-prusa-enclosure-mk4/) - [ ] #project #3d-printer #3dp Might be nice to have a second set of LEDs to light the place up. - [ ] #project #3d-printer #3dp Mount the octopi camera in the enclosure securely. Route the cables better. (Mount the Pi too?) - [ ] #project #3d-printer filament dryer? https://us.polymaker.com/products/polydryer